The RAPIDPoint 500e System elevates Siemens Healthineers blood gas offering to a new level, allowing you to spend more time focused on patient care. Implement a proven end-to-end blood gas solution that reduces the daily burden of device management and enables you to give your full care and attention where it matters most.
With an improved user experience, the analyzer transforms care delivery, setting an elevated standard in simplicity, quality assurance, and data security for healthcare organizations
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The RAPIDPoint 500e system also supports additional sample types: pleural fluid pH; Na+, K+, Ca++, Cl–, pH, pCO2, and HCO–3(act)† for dialysate fluid‡ samples.
†pH, pCO2, and HCO–3(act) are provided for reference only.
|
|
|
|
|
|
|
Automatic QC or ampule QC
Three levels of independent quality control solutions Customizable QC schedule |
|
|
28 days onboard, or maximum number of tests
|
|
|
|
|
|
MICROSOFT WINDOWS 10 IoT
|
|
| Communications | LIS Wireless Dual-port transmission via Ethernet and serial port POCcelerator™ Data Management System POCcelerator SE Data Management System |
Healthcare professionals are increasingly under pressure to deliver quality care in busy critical care settings. Any delay, distraction, or concern in the generation and reporting of test results physicians rely on can add to the operational burden and take time and focus away from the patient.
To give you confidence in every result while reducing the time to diagnosis and treatment, the RAPIDPoint 500e system provides robust accuracy from sample to sample by leveraging the Siemens Healthineers-designed Integri-sense™ Technology—the guardian of patient results. Integri-sense Technology is a comprehensive series of analyzer functional checks and flagging mechanisms designed to deliver accurate test results. It performs frequent quality and blood integrity checks before, during, and after every patient sample. Three levels of independent automatic quality control, multiple calibration routines, and advanced software algorithms combine to enable the RAPIDPoint 500e analyzer to be ready to generate reliable and clinically actionable test results each and every time.
Depend on the RAPIDPoint 500e system to raise the bar in blood gas IT security at your facility with the latest defenses to guard confidential patient data coupled with the leading built-in technology to protect your institution from external cybersecurity threats. The WINDOWS 10 operating system has been equipped with McAfee embedded anti-malware, which blocks unknown and unauthorized programs from running. Other key security advantages include a two-step authentication process, an encrypted password requirement for patient data transfer, and the inclusion of a firewall to block hacking attempts.
This user-friendly and maintenance-free analyzer provides the patient results most needed by clinicians in critical care environments. The simplicity of the RAPIDPoint 500e system centers on the fact that it is a fully cartridge-based analyzer, with no maintenance required. The measurement cartridge includes the planar sensors, sample probe, and CO-ox chamber, so all these components are replaced with every new cartridge.
One of the unique features of the RAPIDPoint 500e system is the sample port. Syringe and capillary samples are handled in exactly the same way, and operator variability is eliminated with hands-free automatic sampling. Only 100 µL of sample is aspirated, and the sample port is part of the advanced clot management and air bubble detection mechanism.
Integri-sense Technology is the guardian of patient results. The system performs frequent quality and sample integrity checks before, during, and after every patient sample. Automatic quality control, comprehensive calibrations, and advanced software algorithms combine to enable the analyzer to be ready to generate reliable, clinically actionable results each and every time, delivering confidence with every result.
Service is essential to keep medical equipment operational and safe. Our Nordic service team consists of experienced service technicians stationed across the Nordic countries. Our service technicians are ready to take on your every service need.”
Sentec Digital Monitor (SDM) with activated PO2 channel for tcPCO2, tcPO2, SpO2, PR and HP monitoring
The Sentec Digital Monitoring System with PO2 (SDMS-PO2) provides continuous and non-invasive real-time monitoring of ventilation (tcPCO2), oxygenation (tcPO2) and Heating Power (HP) for neonatal patients. In pediatric / adult patients, the system can be used for tcPCO2, tcPO2, SpOI2, Pulse Rate, Pulsation Index (PI) and HP monitoring.
Transcutaneous monitoring (TCM) provides clinicians with greater insight to quickly identify trends, rapidly and accurately assess patient status, and make more well-informed, timely care decisions.
Designed For EveryDay Life– Now with Auto-EPAP
To meet the needs connected to a wide range of respiratory conditions a ventilator must offer outstanding clinical versatility and performance. But equally important, it must be designed around the patient’s life, activities and home environment. Vivo 45 LS is a life support ventilator for adult and pediatric patients from 5 kg. The Vivo 45 LS is designed to maximize independence and mobility.
Designed for everyday life
The dual-valved LiteAire MDI holding chamber: Collapsible, disposable paperboard design.
The LiteAire® collapsible MDI holding chamber is a unique MDI holding chamber and an innovative alternative. LiteAire’s unique dual-valved MDI holding chamber design delivers pop-up convenience and effective drug output at a fraction of the cost of most plastic holding chambers. In many clinical settings, the LiteAire can reduce costs by replacing existing rigid plastic holding chambers or inefficient spacers with a paperboard alternative. The unique design allows the LiteAire to be reused by a patient over multiple doses and meets and often exceeds the performance of plastic holding chambers.
Untethered six-minute walk test
Vyntus™ WALK allows patients to perform an untethered six-minute walk test (6MWT) by wearing wireless sensors that communicate data to a technician-held tablet PC. Standardize testing to the recommended is 6MWT protocol, because consistent testing yields consistent data for comparison
The system is both patient- and technician-friendly and because we know a single sensor does not fit all clinical needs, comes with an array of easy-to-wear sensors. Because standardizing the complete testing process is critical to meaningful data for patient trending, Vyaire has integrated the complete ATS testing standards in the workflow-driven tablet software application.
