The eFlow®rapid nebuliser system with new eBase Controller is suitable for the treatment of a wide range of diseases of the lower airways. It stands for efficient, safe and fast inhalation treatment, combined with even more advantages:
1 Naehrig S et al. Eur J Med Res 2011; 16(2): 63-6
Aerosol characteristics of the eFlow®rapid nebuliser system
MMADa): 4,6 µm
Respirable Fractiona) < 5 µm: 55 %
Aerosol Output Rateb): 0,5 g/min
Aerosol data according to ISO 27427; nebulised medium: Salbutamol 2.5 ml. Measured values may vary depending on the medication used. Recommended fill volume: see package leaflet for the medication.
a) Measurement with Next Generation Pharmaceutical Impactor (NGI) at 23 °C and 50% relative humidity. Inspiratory flow: 15 l/min
b) Measurement with breathing simulator at 23 °C and 50 % relative humidity. 500 ml breathing volume, breathing frequency 15 cycles/minute, sinusoidal breathing pattern, inhalation/exhalation ratio 1:1 (with adults, may vary in children).
For more technical information please see the Instructions for use.
Click on the video links below to find out more about the topics listed. Please always follow the respective instructions for use.
Service is essential to keep medical equipment operational and safe. Our Nordic service team consists of experienced service technicians stationed across the Nordic countries. Our service technicians are ready to take on your every service need.”
The dual-valved LiteAire MDI holding chamber: Collapsible, disposable paperboard design.
The LiteAire® collapsible MDI holding chamber is a unique MDI holding chamber and an innovative alternative. LiteAire’s unique dual-valved MDI holding chamber design delivers pop-up convenience and effective drug output at a fraction of the cost of most plastic holding chambers. In many clinical settings, the LiteAire can reduce costs by replacing existing rigid plastic holding chambers or inefficient spacers with a paperboard alternative. The unique design allows the LiteAire to be reused by a patient over multiple doses and meets and often exceeds the performance of plastic holding chambers.
The power of ONE – Vyntus ONE is our innovative pulmonary function system equipped with an ultrasonic sensor.
Vyntus ONE is incredibly capable with a modular design that possesses an impressive array of features. Your Vyntus ONE can even grow later on together with your needs delivering high performance and utility in a single package. It is even able to be extended to also measure cardiopulmonary exercise tests with the same module.
It is designed to make your tests more accurate, less intrusive and less stressful for patients.
Helping heal one step at a time
From rehabilitation to orthopedics to physical therapy, the PPS (Professional Power System) Med treadmill provides comfort and assistance to patients who require walking support. This treadmill can accommodate any user’s pace with an absolute zero start speed with increments of 0.1 mph.
The Katana sport is a modern and reliable treadmill that can be connected to external ECG- and pulmonary devices as well as to a Lode software network (LEM or LCRM). The Lode Katana sport offers smooth acceleration and is continuously adjustable in a range of 0,5 – 30 km/h. The walking surface of 190 x 70 cm and elevation of 0 – 25%, make this treadmill the perfect solution for use in sport medical settings. The treadmill is equipped with a 7″ Control Unit with Touchscreen and fixed side handrails. The treadmill is executed with a special Lode Slat Technology with 106 soft grip covered slats that allows for high speed and a natural walking and running treadmill experience. Its Unique bearing technology delivers high speeds at low noise levels while needing low maintenance.
